Issue#2284: Linux - [SOLVED] No Network is showing in wifi scan , slackware64-current RTL8723BE PCIe wireless Ne

  • i have brought a new laptop and installed slackware64-current , how ever i am not able to connect to wifi
    In lspci it is showing the exact wifi device

    "Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe wireless Network Adapter"

    in ifconfig -a it shows wlan0 with mac-id

    in iwconfig it shows
    "wlan0
    IEEE 802.11bgn ESSID: off/any
    Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
    Retry short limit:7 RTS thr=2347 B Fragment thr: off
    Encryption key: off
    Power Management: off"

    i have tried all the ways mentioned in docs slackware and other things on net

    i have installed wicd from extra and ran the client, in that it is not showing any network while scanning

    when i give iwlist wlan0 scan it shows "wlan0 No scan results found"

    where as i am using this same wifi to type this thread in another machine at my home , so i know there is network , but it is not showing at all in the machine...could you all help i have been behind this since 2 days and i cant figure it out

    By the way i forgot to mention that the machine which i am typing is from slackware 14.0 which i installed 3 years back , in this machine also it took a while to figure out at that time , so now when i check in my old machine for conf files like rc.wireless , wpa_supplicant , etc i dont see anything related to my wifi in these config files but this still works and i dont how.. please help me

    0 Answers

    Sorry, your answer is too short !

  • Issue#2323: Linux - [SOLVED] OpenCV slackbuild fails on Slackware64-current

    I'm using ponce's slackbuild. It fails with these errors: Code: /usr/lib64/gcc/x86_64-slackware-linux/5.3.0/../../../../x86_64-slackware-linux/bin/ld: warning: libicui18n.so.51, needed by /usr/lib64/libQt5Core.so.5, not found (try using -rpath or -rpath-link) /usr/lib64/gcc/x86_64-slackware-linux/5.3.0/../../../../x86_64-slackware-linux/bin/ld: warning: libicuuc.so.51, needed by /usr/lib64/libQt5Core.so.5, not found (try using -rpath or -rpath-link) /usr/lib64/gcc/x86_64-slackware-linux/5.3.0/../../../../x86_64-slackware-linux/bin/ld: warning: libicudata.so.51, needed by /usr/lib64/libQt5Core.so.5, not found (try using -rpath or -rpath-link) I have *.so.56 versions of these libraries. How do I determine which package(s) these libraries belong to and where do I go to get the proper version? I'm trying to get digikam install for the record. It requires opencv.

  • Issue#87206: Linux - [SOLVED] Pulseaudio and wine (sound issue) on -current

    I am using mostly playonlinux (so all different versions of wine) however i get this problem with both the wine package from slackbuilds, and within playonlinux, when configuring wine (winecfg) and testing the sound. I can hear no sound in any games, or with the test button; this prints out in the terminal: Code: Aerr:module:load_builtin_dll failed to load .so lib for builtin L"winepulse.drv": libjson-c.so.2: cannot open shared object file: No such file or directory ALSA lib dlmisc.c:254:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/alsa-lib/libasound_module_pcm_pulse.so ALSA lib dlmisc.c:254:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/alsa-lib/libasound_module_pcm_pulse.so err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded I had recently installed these packages alsa-plugins-compat32-1.1.0-x86_64-2compat32 pulseaudio-compat32-8.0-x86_64-1compat32 , hoping they provide what migh

  • Issue#301041: Linux - [SOLVED] CSS box-shadow showing as pink instead of black in Firefox on -current

    OK, so I was having an issue where the CSS property "box-shadow" would show up as a red color if the alpha channel was set to anything lower than 1, making google hangouts and a bunch of other sites have some odd looking text and borders. In the process of writing up this post, trying to figure out when it started happening and looking at the changelog, I noticed that xorg was updated, so I went through my logs and configs in /etc/X11/xorg.conf.d and disabled glamor, reloaded X and the issue is gone. So if anyone happens to see the issue themselves, I'm posting this here. Remove Code: Section "Module"         Load                "glamoregl" EndSection from /etc/X11/xorg.conf or whatever file in /etc/X11/xorg.conf.d/ that has that (in my case I had /etc/X11/xorg.conf.d/glamor.conf)

  • Issue#410712: Lenovo - Lenovo Z50-70 Wifi Issue with Realtek RTL8723BE Wireless Card - FIXED!

  • Issue#411110: Lenovo - Lenovo Z50-70 with Realtek RTL8723BE wifi card Issue - SOLVED!

    Hi all Thought I would share this after hours of internet searching what my issue could be and finding nothing except "Is your Wifi Enabled?" type responses.  So here is a succcint problem/solution that may work for you too. Problem A couple of week ago, my wifi connection started to be very slow at home and would not connect to public wifi hotspots, such as O2 Cloud.  I did the usual updating drivers etc with no success.  I eventually noticed that the signal bars on the discovered networks were weak and at public hotspots, extremely weak.  Made me think about the wifi antennae inside the laptop... Solution (only proceed if you dont mind your warranty possibly being invalidated, are competant and are fed up with your wifi not working) 1) Turn off laptop. 2) Remove Battery 3) Take the middle panel off the back of the laptop (three small screws out and side panel forward) 4) The wifi card is the small card near the memory cards.

  • Issue#740066: Lenovo - w510 wireless icon always showing no network issue

    My W510 right bottom corner network icon always shows as no network. and if I plug in the network cable, the wired and wireless icon and switch back and forward automatically. I am thinking my need to update the wireless adapter but I found there are four of them on the site and I don't know which one i should use. Anybody can help me? thanks     

  • Issue#940120: Linux - [SOLVED] Centos 7 wifi issue

    I installed centos 7 on my laptop and i made the mistake of not setting up the network before clicking install... I did the first time, but i selected too many options and got a software error. second time around i rushed.. I am now hard wired, but before i did that, i mounted the dvd and installed the Network-Manager-wifi* with the rpm command. lspci shows my card, but nmtui only shows me the ethernet card and 'bridge' the gui network manager does not give me the option to add wifi. I am currently doing 'yum update' and will keep at it, but maybe someone can point me in the right direction. thanks UPDATE: after tinkering and doing a reboot, wifi option is there, and it automatically connected. So i guess i did choose that option during install...

  • Issue#953835: Lenovo - Issue with Wi-Fi in Moto G4 Plus(Not showing WEP protected Wifi network)

    Hi Experts, I am facing a very peculiar type of issue with my Moto G4 Plus phone. It is not searching or showing WEP Security type Wi-Fi although it has a frequency band of 2.4GHz. Same Wi-fi is showing in my Asus Zenfone & my PC and i am able to connect with them also. Moto G4 plus is showing only WPA2 security type Wi-Fi networks only which are nearby.My problem it is simply not showing this Wi-Fi Network.(Everyone is able to connect with this Wi-Fi as this is a PG Wi-Fi Networ).I am not able to understand why this is happening Can anyone help me on this , because as per Motorola claim it should show all type of Wi-Fi security type networks. Screenshot is also attached for references.PC SCreenshotAsus Zenfone 5 ScreenshotMotorola G4 Plus ScreenshotRegards,Nitish

  • Issue#965398: Lenovo - Miix 300-10 issue with : warnings in the Wireless hardware scan test, connected to wifi but

    Recently bought this product and from beginning had a constantly problem with wifi adapter, which seems to constantly drop off wifi connection. Tryed many different wifi connection and while some random mobile phones connected to that  wifi's without problem and worked flawlessly, this product  Ideapad miix 300-10 connected too, but no internet connection or had internet connection that worked flawlessly for some random period (from 5 mins to 30 mins) and than suddenly drop off connection, while still in wifi manager said that is connected to internet. Just to mention that i tryed all drivers, newest, older, oldest, every driver from lenovo supp site and even realtek site too. Done latest bios update too, also switch to high performance in case that is sleep mode turned off wifi connection or whatewer, and issue still presented.This product have realtek rtl8723bs wireless lan 802.11n sdio network adapter...Please answer how to fix this issue in w

  • Issue#2299: Linux - Java applications with gui start really slow when connected to a wireless network

    I hope that I chose the right forum for my question because I'm not entirely sure where it fits best as my problem is a bit... let's say interesting: Whenever I start netbeans while I'm connected to a wireless network it starts really slow (it takes about 1 to 2 minutes). When I'm not connected to the internet (or connected through another device like a usb modem or LAN) it starts within 5 to 10 seconds. The same thing seems to happen with all java applications that have a gui. Once the programs have started they run fast and I don't experience any difference no matter if I'm connected to a wireless network or not. So far I have tried a few things including switching between OracleJDK and OpenJDK, reinstalling netbeans and setting the max ram to 8GB for the processes. Unfortunately none of these actions have shown any positive effect. At the moment I happen to be developing a somehow complex gui in java and it drives me crazy that I have to wait 15 to 30 seconds until it starts. C

  • Issue#2331: Linux - [SOLVED] Remote X no longer working on X server after upgrade to current

    Hi, Prior to upgrading my desktop machine from 64-14.1 to 64-current last night I was able to open remote windows on the local screen. This no longer works. The local machine does still work as an X client, just not as an X server for remote windows. ssh was not used in any way, it even worked with telnet opening the initial connection so ssh is not the issue. netstat shows the local, upgraded, machine does not have port 6000 open even though defaultserverargs is empty. How to re-enable please?

  • Issue#14412: Linux - Problem connecting to open wifi using /etc/network/interfaces

    Running Jessie 4.1 kernel on an embedded system (no GUI). I can connect to a WPA2 wireless network with no problem. However, I can't seem to connect to an open network - even if it's the same exact router (just set up as open rather than WPA2). Working stanza from interfaces file for WPA2: Code: auto ra0 allow-hotplug ra0 iface ra0 inet dhcp wpa-ssid VECS2 wpa-psk "passphrase" Not-working stanza for open network (router reconfigured in between, tested with laptop): Code: auto ra0 allow-hotplug ra0 iface ra0 inet dhcp wireless-essid VECS2 It also fails of every other open network that I've tried. It appears to never get a DHCP response: Code: [email protected]:~# ifup ra0 Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/ra0/7c:dd:90:9f:c3:3f Sending on  LPF/ra0/7c:dd:90:9f:c3:3f Sending on  Socket/fallback DHCPDISCOVER on

  • Issue#17749: Linux - slackware46-current iso installed on UEFI machine ,but not showing on EFI section or at boot

    Hi All ,i bought a new laptop of HP with UEFI and i have installed windows 10 and slackware64(AKA 14.2) The problem is when in the boot option to install slackware from Internal CDROM UEFI , it just shows "welcome to Grub" and freezes the screen , i had to install using the boot option just internal CDROM (not UEFI) and slackware installation went fine and in the end it didnt show for ELILO so i installed lilo . Now what happens when i turn on my machine is that without any interference it will boot only to windows but when i turn on the machine and press "ESC" for my machine boot options and then i select "Notebook drive" it comes to LILO of slackware without any other OS but just linux , and when i enter it , it normally boots into slackware..and everything is working fine When i am in slackware i dont find EFI boot sector, How can i install ELILO without reinstalling both OS , i read the slackdocs , but nothing works for me ... i dont have clue o

  • Issue#29502: Linux - Zorin 9 Wireless Network access

    This is my first post. I installed Zorin 9 on an old HP Pavilion 5240ca entertainment notebook and so far all is going good. I managed to get everything working including the wireless drivers but now I am stuck trying to get the wireless access actually working. I will search this site as it seems to have a lot of good information but thought if someone has a quick solution it would make my life a little easier but no worries, I will figure it out eventually...... Joe

  • Issue#40486: Linux - Network Manager Applet NOT Showing on System Tray

    Hello, For some reason the network manager applet on the system tray does not start which is weird since all network and internet are working perfectly. I am using kubuntu 14.04. and when I try to start applet on terminal manually I get the following error: Code: [email protected]# nm-applet ** (nm-applet:7749): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: The name org.freedesktop.NetworkManager was not provided by any .service files (nm-applet:7749): nm-applet-WARNING **: Failed to initialize D-Bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (nm-applet:7749): GLib-GObject-CRITICAL **: object NMApplet 0x1fce030 finalized while still in-construction (nm-applet:7749): GLib-GObject-CRITICAL **: Custom constructor for class NMApplet returned NULL (which is invalid). Please use GInitable i

  • Issue#52349: Linux - Lots of problems with Xubuntu and wireless network

    Hello. A few days ago I posted on the Hardware forums having issues with my wireless adapter (it does not work if I do not unplug it and plug it again), and I found no solution. The problem is that now I am having more and more problems. The first two or three days after the Xubuntu installation I could surf on the internet perfectly and everything went fine. However, yesterday WiFi started to disconnect and connect again, be slow, etc. On a first quick search I saw that many people solved it by installing Wicd, and it was a big surprise when I did it and I saw that every wireless network near me is marked with "-1" signal. What's wrong with my adaptor? It works perfectly fine on Windows, and it is making me wanting to quit Linux forever. If someone could help me, I would be very grateful. Thanks in advance. EDIT: My adaptor is a TP Link TL-WN725N and I am using Xubuntu 15.10, 64 bit version

  • Issue#79909: Giffgaff - No wireless & network in settings on Samsung Galaxy Note3 to get internet. Has WiFi.

    Followed instructions. Tapped memoryTapped settingsNo wireless and network section or mobile networks Phone has WiFi and automatically connects to it. How can I connect to the internet so as to make use of my goodybag. ThanksTeresa

  • Issue#81190: Linux - Slackware64-14.2(current) 03FEB2016 eliloconfig and PXE boot installation

    I've setup a PXE server per instructions in "usb-and-pxe-installers/" to network boot 14.1 and Current and install via NFS. The DHCP is handled via OpenWRT 15.05 on a Netgear router, PXE server is Slackware32-14.1 and syslinux-4.06. Everything work ok on both 32- and 64-bit systems with standard BIOS to boot and install Slackware. In each case I select from a menu to boot the correct kernel (32 or 64). However, when booting via PXE on UEFI systems, eliloconfig is not used - only liloconfig. Thus, the /dev/sda1 EFI partition (boot/efi, vfat) is not updated -even on a clean install with repartitioned, reformatted hard drive. Running eliloconfig after installation and before reboot does nothing. I can manually copy the appropriate files over to the EFI partition as a workaround. I would prefer to use PXE instead of DVD/USB. There seems to be a glitch somewhere, or is it because PXE boots the UEFI system initially as 32 bit? Code: # ls -gG --group-directories-first total

  • Issue#90010: Linux - 14.2/Current Xorg issue

    When I try to run Xorg -configure or xorgsetup results in X generating an error and refusing to write an xorg.conf for diagnostic and testing purposes. Xorg is working correcting with the automatic configurations though. I'm on my mobile at the moment, so I can't duplicate or post the error, yet. This is a fresh install for an ISO.

  • Issue#92965: Linux - Slackware64-current installation

    I am using Slackware for 2 or 3 years, but now I have a problem. I decided to install Slackware64-current. With 'usbimg2disk.sh' prepared USB stick and started installation. But after grub menu I see this. I've tried to pass several vga modes (text, vgahi, vgalo, vga!6) but without any effect. Can anybody explain to me, what can be done? (Lenovo G780, switchable graphics).

  • Issue#119273: Linux - [SOLVED] Finding lost machine on network trouble

    Couldn't find my PC on network. Root of evil the was in bad patch-cable.

  • Issue#125026: Linux - Slackpkg+ issue on current

    I'm running Slackware64_current as of 11/02/2016 and I'm getting an error when slackpkg+ is enabled via the on/off variable at th etop of slackpkgplus.conf Installed versions are :- Slackpkg-2.82.0-noarch-16 Slackpkg+-1.6.1p2-noarch-1mt when slackpkg+ is enabled I get the following error, ls: cannot access '*.t[blxg]z': No such file or directory Everything seems to work OK ? If it's my setup any hints on where to look for the problem will be gratefully received.

  • Issue#145013: HP - laserjet 1025nw manual IP with wireless network issue

    HI all, I have a new laserjet 1025nw . I would like to config manual IP with wireless but failed, i found that, even i config the same IP from DHCP to manual , for example, i get 192.168.0.3 from DHCP, and set it up 192.168.0.3 manual, the EWS/EMS?  (the printer website )  cannot work. I can ping the IP, but not visit the printer by IP. the 80 port on the printer refuse to response even i try to telnet it. It can only be ping, everything start not working. Anybody faced the same issue? How can i solve this? Printer have this firmware version, i should have updated this from the HP website  Firmware Date:20150114 Thank you

  • Issue#160791: Linux - Detection of sybil attack in wireless sensor network in ns2. I need help to simulate it in n

    Hello forum, I need help for simulation in ns2. I want to implement sybil attack detection in wireless sensor networks. For making some node sybil, that node need to send packets using fake identity. So i want to know how can i make some node sybil. i.e., how to change sender node's identity. I would even like to know which protocol should i use for the same. Need help in this matter. Thanks, Mirali

  • Issue#160847: Linux - [SOLVED] Okular - current

    Is this PDF causing segfault like me too. http://cereals.ahdb.org.uk/media/547...at-2014-V2.pdf I have several /3/ pdfs that opened ok but now segfaults. Strange.

  • Issue#195657: Linux - Skype on Slackware64 current, without Multilib?

    Hi, I need a Skype package, in the style of the one made by Zerouno, with a mini-multilib included, but what I find use also whatever self-contained PulseAudio or APulse. However, right now the current tree is already Lennartized, then I suppose that there is no need for that part. Someone know a Skype package adapted for the latest Slackware64 current? Thanks!

  • Issue#207077: HP - Home Wifi network not showing on laptop

    I recently bought a new dual band D-link router when I changed my ISP. But, my laptop does not show my own home wifi (ssid) network but shows me neighbouring wifi networks. My other older Compaq laptop always shows my home wifi network and all the mobiles are able to connect to home wifi. Sometimes, all of a sudden the wifi is detected on the laptop and on another day it wont detect.I don't understand why this is happening. Please help me out. My network adapter name shown in device manager is Ralink RT3290 802.11 bgn.

  • Issue#208538: Linux - Libvirt doesn't seem to compile correctly on slackware64-current

    Slackers, I'm trying to get libvirt to work on slackware64-current and while it compiles just fine, it refuses to run because of an undefined symbol: 2016-03-01 20:09:26.822+0000: 27849: error : virDriverLoadModule:73 : failed to load module /usr/lib64/libvirt/connection-driver/libvirt_driver_storage.so /usr/lib64/../lib64/libfl.so.2: undefined symbol: yylex I'm not really doing anything odd, here is my configure options in my package building script: ./configure \ --prefix=/usr \ --libdir=/usr/lib64 \ --bindir=/usr/sbin \ --sbindir=/usr/sbin \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ --docdir=/usr/doc/libvirt-1.3.3 \ --enable-static=no \ --enable-shared=yes \ --with-yajl \ --with-python=/usr \ --with-qemu-group=users \ --with-init-script=none \ --with-storage-iscsi Looks like the old slackware64-14.1 had flex compiled statically and current has an SO, so I figure that's why this didn't happen on 14.1. Any thoughts on how to fix this? schu

  • Issue#216042: Ubuntu - Issue with NETGEAR WNA3100 and WNDA3100V2 wireless network adapters

    Hello, I have been watching around on the forums about Netgears histroy with Linux systems and it seems it doesn't end up well. I am seeking assistance for these 2 wifi adapters on which i despertly need to work, I cannot go back to Windows 8 becasue I dont have a USB big enough or a DVD disk. I read some of the other forms about this issue and i did what they had done such as $sudo\desktop\bcmnxx64.inf and what not and that works but my problem is unique , after is hit $ sudo modprobe ndiswrapper both of the adapters work and I go to load 3\4 sites, they load up but after some time poof it doesn't have internet anymore , still registering connected but not receiving data at all. I am litterly 3 days new to Ubuntu and I have tried 7 other Linux OS's and they all do the same. I do not have Ethernet either, I only managed to get this far thanks to my Iphones hotspot via USB ... Of course I have used 4\21 GB of data trying to get the dammn thing to work .. No luck^^ please help!!